The reducer device is the element of the transmission of the reducer. The general classification of the reducer device is to produce a part of this. The component device and the speed reducer are the key parts, which are responsible for the transmission of mechanical energy to be compatible with the transmission flow. The role of sexual velocity. In terms of the structure of the reducer, a reliable reduction device is more critical for how to apply the time circumference.

In the case of the reducer with more hairpin structure styles and curve diagrams used in the reducer, it can be seen whether the reducer will enter the shaft building facade, and the tooth cone of the reducer arc is analyzed. In the overall conveying device, and the motor are butted to each other.

Therefore, when the shaft of the reducer is operating, the rotation efficiency is also higher, then the temperature difference generated during the operation is relatively large in the transmission torque, and the overall shaft operates at a higher temperature. Then, the structure of the shaft must also be reliable, and it belongs to the area where the reducer must be installed effectively during the installation process. In that case, in the case of the transmission system, the difference in the overall transmission effect is relatively large.





The transmission target of the reducer of the scraper is an overall similar coal block, and the operating area is also the total operating area under the coal well, and the impact installation and its load are often likely to occur during the operation of the reducer. The situation of exceeding oh occurs.

Since the operating conditions of the reducer are not relatively good, and there are actually structural deficiencies, in the case of application of the toothed cone of the shaft of the reducer, the relative friction of the shaft is prone to damage. , and has always had to be replaced.