English
简体中文
русский
These are all customized products according to
customer's requirement. If needed, we can
provide custom sevice for you.
After cooling, the viscosity of the oil increases, and it is difficult to drain the oil. The reducer should be changed at the operating temperature.
1. Cut off the power supply to prevent electric shock. Wait until the reducer cools down and there is no danger of burning; (Note: The reducer should still be warm when changing the oil.)
2. Put an oil pan under the oil drain plug;
3. Open the oil level plug, breather and oil drain plug;
4. Remove all the oil;
5. Install the oil drain plug;
6. Inject new oil of the same grade (note: do not add lubricating oil of different grades into the same reducer);
7. The amount of oil should be consistent with the installation position;
8. Check the oil level at the oil level plug;
9. Tighten the oil level plug and breather.
