A gear reducer is installed in front of the output shaft of a vertical ordinary motor (single-phase or three-phase asynchronous motor) to form a gear reducer motor.

The role of gear motor
Geared motors are used in all walks of life to provide corresponding power and speed for these machinery and equipment. Its main function is to decelerate and increase force.
Application of gear reduction motor

Gear reduction motors are widely used and are indispensable power equipment for mechanical equipment, especially in packaging machinery, printing machinery, corrugated machinery, color box machinery, conveying machinery, food machinery, three-dimensional parking lot equipment, automatic storage, and three-dimensional warehouses. , Chemical, textile, dyeing and finishing equipment.

To determine the model of a gear reduction motor, the following tasks need to be done:
(1) Determine the operating speed of the machine, and calculate the reduction ratio of the gear reduction motor based on this speed;
(2) Calculate the torque of the load, select the output of the gear reduction motor based on this torque (refer to the "output torque table" provided by the gear reduction motor manufacturer), and determine the model of the gear reduction motor;
(3) Determine the additional functions of the gear reduction motor, such as power-off brake, power-on brake, frequency conversion, shrinking frame, shell material, etc. Some additional functions can only be provided by specific factories, such as the city state gear reducer, which provides all Additional features, so communication with suppliers is very important when choosing.

Here is the instruction manual of the gear reduction motor to explain the installation and maintenance precautions of the gear reduction motor.
⑴ Before use, please confirm whether the geared motor is broken or leaking oil.
⑵ Please confirm the voltage of the geared motor first. A voltage stabilizer can be installed when the voltage is unstable.
⑶ Please first confirm whether the specifications of the geared motor purchased are consistent with the design specifications.
⑷ Please make sure to fix the base to avoid loosening when the transmission is running.
⑸ If accessories such as sprocket, pulley, coupling, etc. are used, they must be installed in accordance with relevant regulations.
⑹ Lubricating grease has been put in the body of the geared motor, and no need to change the lubricating oil for 12,000 hours.
⑺ When the geared motor is running, the rated current should not exceed the current value indicated on the motor nameplate.
⑻ Please pay attention to the surrounding temperature, humidity, pH and other issues.
⑼ Adapt to the environment from -10°C to +40°C, humidity below 90%, indoor altitude below 1000 meters.
⑽ If it is not installed, maintained or operated in the correct way, it may cause serious injury to the geared motor.
⑾ When repairing or disassembling, make sure that the external power supply is disconnected from the geared motor.
⑿ The protective device must be installed to ensure operation.
⒀ The motor needs to be grounded, please refer to the power distribution regulations.
⒁ Please confirm that all installation parts and transmission accessories are fixed correctly before starting the geared motor.
⒂ If the geared motor cooperates with the inverter to drive at low speed, an independent auxiliary cooling fan must be installed.
⒃ After the single-phase geared motor is powered off, there is still some charge in the capacitor, please discharge first or ground the terminal.
⒄ When the motor is installed vertically, please inform the technical department of our company first.