When using the reducer for the first time, add lubricant to the gear
Posted by Admin
0 | May 18,2021 17:14
When the reducer is used for the first time, the corresponding viscosity and the corresponding gear oil volume should be involved. Please check the nameplate of the reducer before filling. The data related to the smoothing agent is the data starting from VG. When adding, you should also check the oil meter. The level of smoothing agent to be filled should be between the two marks of grease stain.
In fact, the role of smooth oil in the reducer is to form a smooth oil film on the contact part of the gear and the bearing, so that the gear meshing part and the rolling part of the bearing are in a non-contact condition, avoiding hard conflict and extending the service life of the reducer. Regarding the reducer of the paver, the country has relevant regulations. The temperature rise at a certain temperature has certain standard requirements. Let us see how to calculate the temperature rise.
The national standard regulates the environmental conditions for measuring the temperature rise of the walking reducer (hereinafter referred to as the reducer). Determination of measurement methods and measurement effects. This standard applies to smooth oily gearboxes.
Everyone has seen the above process and should be able to understand some elements of the temperature rise of the reducer. The walking reducer is the core component of the walking mechanism of the paver. During the operation, it was also affected by the operation equipment and various workers.